Honeywell Outdoor Ceiling PIR Mw Infrared Digital DetectorDT6360

Honeywell Outdoor Ceiling PIR Mw Infrared Digital DetectorDT6360

china security alarm system /Honeywell Ceiling Mount Design Outdoor High-Security  PIR Microwave and Infrared Digital Detector DT6360STC

 

Physical Dimensions
White, high impact, ABS plastic
housing
5" H x 5" W x 2.3" D(12.7cm x 12.7cm x 5.8cm)
Weight: 14 oz (397 g)
Power Requirements
10 – 14.5VDC
40mA, 12VDC typical
Trouble Output
– Open collector: voltage between collector and emitter (Vce) is 0.3V@ 50mA
Alarm Relay
– Energized Form C: (N.O./N.C.)
reed relay rated 125mA at 25VDC
PIR White Light Immunity
– 900 LUX
Detection Range
– 50' (15m) diameter, 25' (7.6m) radius
Microwave Frequencies
– 10.525 GHz

 

 

Microwave Advanced Processing (MAP)
Incoming microwave and PIR signals are constantly monitored and individually qualified for intrusion characteristics. The timing and sequence of each of these signals must be qualified by MAP settings to specific environments, allowing for optimum catch performance and false alarm immunity.

Microwave/PIR Technology
The use of dual technology provides the best detection available while virtually eliminating false alarms and costly service calls.

Built-in Diagnostics and Supervision
Allows trouble conditions to be quickly identified, diagnosed and corrected.

Ceiling Mount Design
360° field-of-view, mounting height from 8' to 16' (2.4m to 4.9m), install as recessed or surface mount.

Microcontroller-initiated Self-tests
Microcontroller automatically initiates self-tests at power-up, trouble conditions and programmed intervals.

Trouble Output
After a trouble is confirmed with a self-test, the trouble output can be used to annunciate the trouble condition.

Full Supervision Microwave/PIR
– Patented INFORMER® circuit constantly monitors microwave and PIR against blockage and misapplication.
– Independent circuit supervises both microwave and PIR against failure; at a loss of signal, microcontroller initiates self-test and unit switches automatically to single technology operation.

Mounting
Surface or flush mount on ceilings (flush mount kit included); maximum standard range obtained at 11' (3.4m). PIR mirror assembly included for installation on 12' to 16' (3.7m to 4.9m) ceilings.

Product Origin: china
Model Number: Infrared Digital Detector DT6360STC
Brand Name: Honeywell
   
   

Contact UsMSN chat with us Skype chat with us

Company Name: SHENZHEN AMIDA TECHNOLOGY CO., LTD
Contact Person: amila
Address: Tangtou Industrial Zone Shiyan Town, Baoan District, Shenzhen, China
Zip: 518108
Telephone: 13424170232
Fax:  
E-mail: amila@sealarm.com
Website: http://sealarm.tradeee.com

Send Inquiry

Your Name:
Email:
Your Company:
Country/Area:
Content:
CAPTCHA:
CAPTCHA Image Load new image